{"id":2183,"date":"2026-09-24T10:00:00","date_gmt":"2026-09-24T14:00:00","guid":{"rendered":"https:\/\/slecotech.com\/?p=2183"},"modified":"2026-09-23T23:32:53","modified_gmt":"2026-09-24T03:32:53","slug":"plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics","status":"publish","type":"post","link":"https:\/\/slecotech.com\/ja\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/","title":{"rendered":"\u30d7\u30e9\u30b9\u30c1\u30c3\u30af\u30b7\u30e5\u30ec\u30c3\u30c0\u30fc\uff1a1\u53f0\u306e\u6a5f\u68b0\u3067\u672c\u5f53\u306b\u3042\u3089\u3086\u308b\u30d7\u30e9\u30b9\u30c1\u30c3\u30af\u3092\u51e6\u7406\u3067\u304d\u308b\u306e\u304b\uff1f"},"content":{"rendered":"
\n

This is the question behind half the emails I get from plant managers.<\/p>\n

“We run film offcuts, some thick-walled reject parts, a bit of pipe, and purge blocks from changeovers. Do we need a different shredder for each one?”<\/p>\n

The short answer is almost always no. One machine handles all of that \u2014 not by being a magic universal device, but because a well-specified plastic shredder machine is configurable. Same rotor housing, same drive, same frame. You change the screen, the rotor and cutter setup, and the feed arrangement to suit what’s going through it that week.<\/p>\n

Where people get burned is the opposite mistake: they buy a machine spec’d for one material, then feed it something else and conclude shredders don’t work. Or they buy three machines when one would have done the job, and now they’ve got three maintenance schedules and a floor space problem.<\/p>\n

So here’s the practical version \u2014 what a single plastic shredder machine can genuinely process, how the configuration changes by material, and the point where one machine stops being enough.<\/p>\n

What a Plastic Shredder Machine Actually Does<\/h2>\n

Strip away the marketing and it’s a simple, tough machine.<\/p>\n

Material goes into a hopper. A hydraulic ram (on single shaft machines) pushes it against a slow-turning rotor fitted with cutters. Those cutters tear the material against a fixed bed knife. Pieces keep getting worked until they’re small enough to drop through a screen sitting under the rotor.<\/p>\n

That’s the whole cycle. And the reason it handles such a wide range of plastics is that nothing about that cycle is material-specific<\/strong>. It’s mechanical size reduction \u2014 grip it, tear it, screen it. Whether you’re feeding a roll of film or a 30 kg purge block, the machine does the same thing. What changes is how you set it up.<\/p>\n

Compare that to a granulator, which relies on a high-speed scissor cut. That’s a precision operation that’s fussy about feed form \u2014 it wants small, light, consistent pieces. A plastic shredder doesn’t care. It will take a lump, a pipe, a bale, or a bundle and reduce it. That indifference to feed form is exactly why it’s the first machine in most recycling setups, and why it’s usually the only one a factory needs for its own scrap.<\/p>\n

The Material-by-Material Reality<\/h2>\n

Let me go through what actually goes through these machines, because “it shreds plastic” is too vague to be useful. Each material behaves differently in the chamber, and each one wants a slightly different setup.<\/p>\n

Film, bags and stretch wrap<\/h3>\n

The classic wrapping problem. Film wants to spiral around the rotor instead of being cut. The fix is a rotor and cutter geometry that grips and pulls rather than lets material wrap, plus enough ram pressure to keep the film moving into the cut instead of bunching. Get this right and film runs fine. Get it wrong and you’re clearing wraps every hour.<\/p>\n

Thick-walled parts and reject moldings<\/h3>\n

Refrigerator liners, bumper sections, thick housings, failed blow moldings. These are rigid and bulky but not especially hard. They want a rotor with aggressive bite and enough torque to take a solid section without stalling. Usually the easiest material on the list.<\/p>\n

Pipe and profiles<\/h3>\n

Long rigid sections are awkward because they roll and bridge in a standard hopper. For long pipes we build the P Series<\/strong> with a horizontal V-channel cradle and a ram that feeds pipe in lengthwise \u2014 a standard vertical hopper simply can’t do this reliably. Short offcuts are fine in a standard machine.<\/p>\n

Purge lumps and solid blocks<\/h3>\n

Dense, heavy, sometimes 30 kg of cooled polymer. This is where ram force and torque matter most, and where a granulator would simply stall. A plastic shredder machine built for lumps needs a ram that can push a dense block into the cutters with real authority, and a gearbox that keeps cutting at low speed under load.<\/p>\n

Woven bags, raffia and bulk bags<\/h3>\n

Fibrous and stringy. Similar wrapping risk to film, and it benefits from cutters that shear cleanly rather than tearing fibre into long strands. Screen choice matters here \u2014 too fine and the strands pack the screen.<\/p>\n

Foam and expanded plastics<\/h3>\n

Very low density, enormous volume. The challenge isn’t cutting, it’s throughput \u2014 foam takes a lot of chamber volume for very little weight. Machines handling foam are usually sized on volume rather than kilos.<\/p>\n

Mixed rigid scrap<\/h3>\n

The messy reality of most factories \u2014 a bit of everything in one bin. A single shaft machine handles this well precisely because it isn’t fussy. This is the most common real-world feed, and the reason “one machine for everything” usually works out.<\/p>\n

How One Machine Covers All of That<\/h2>\n

Three settings do the work, and this is the part that saves you from buying three machines:<\/p>\n

1. The screen.<\/strong> This is the big one. It sets your output size, and you can swap it. Running film today and purge blocks tomorrow? Coarser screen for throughput, finer when the downstream needs it. Screens are cheap relative to a second machine.<\/p>\n

2. The rotor and cutter configuration.<\/strong> Different cutter shapes and rotor types suit different materials \u2014 aggressive bite for solid blocks, wrap-resistant geometry for film and fibre. On a properly specified machine, this is chosen at build time for your dominant material, and it’ll still handle the rest competently.<\/p>\n

3. Ram force and drive torque.<\/strong> Set at spec time based on your toughest feed. If your hardest material is a 30 kg purge block, the machine gets built to handle that, and everything softer is easy by comparison.<\/p>\n

That’s the economics of it. A second machine costs tens of thousands and needs floor space, power, and maintenance. A spare screen costs a fraction of that. Buy one machine built for your hardest material, and let the consumables handle the variation.<\/strong><\/p>\n

When One Machine Genuinely Isn’t Enough<\/h2>\n

I’d rather be straight about this than sell you something that doesn’t fit. One plastic shredder machine stops being the right answer in a few specific situations:<\/p>\n

You need tight, uniform regrind.<\/strong> A shredder makes flake, not precision granulate. If your product demands a consistent small particle size, you’d shred first and granulate second. The shredder is still needed \u2014 it’s just not the last step.<\/p>\n

Your material is contaminated or mixed-polymer and needs washing.<\/strong> Shredding doesn’t clean anything. Dirty post-consumer material needs a washing line, and that’s a different discussion entirely.<\/p>\n

Extreme volume.<\/strong> If you’re processing several tons an hour, one machine becomes the bottleneck and you’d size up or add units for throughput, not because of material type.<\/p>\n

Very dense or tangling industrial waste<\/strong> \u2014 whole tires with steel belt, heavy metal-containing assemblies. Those want a heavy twin-shaft machine, not a general-purpose plastic shredder.<\/p>\n

Notice what’s not<\/em> on that list: having several different types of plastic.<\/strong> That by itself is not a reason to buy more than one machine. It’s the most common worry and it’s almost never the real constraint.<\/p>\n

What to Tell a Supplier Before You Buy<\/h2>\n

If you want one machine to cover your mix, don’t ask for “a plastic shredder.” Give the supplier this, and you’ll get a machine that actually fits:<\/p>\n

    \n
  1. Every material you’ll feed, with the hardest and toughest one named.<\/strong> Not the average \u2014 the worst thing that will ever go in the hopper. The machine gets built for that.<\/li>\n
  2. The biggest single piece.<\/strong> A 2 metre pipe and a 20 cm offcut are different machines.<\/li>\n
  3. Your output requirement.<\/strong> Where does the flake go? Into a granulator, back into your own process, or out the door? This sets the screen.<\/li>\n
  4. Monthly volume, honestly.<\/strong> This sizes the machine and tells you whether the purchase pays off at all.<\/li>\n
  5. Power and floor space available.<\/strong> Practical, but it eliminates options fast.<\/li>\n<\/ol>\n

    With that list, a supplier can tell you whether one machine covers your mix \u2014 and if it doesn’t, they should tell you that too.<\/p>\n

    How We Build Them<\/h2>\n

    Most of the machines we ship for mixed factory scrap are S Series<\/strong> single shaft shredders, configured for whatever the customer’s hardest material is: the right rotor and cutters, a ram spec’d for the densest feed, and screens for the output they need. Where long pipe is the main diet, that’s the P Series<\/strong> with its cradle feed. Where the waste is very bulky and light, or genuinely tangling, the T Series<\/strong> double rotor machine is sometimes the better call \u2014 and we’ll say so rather than force a single shaft into a job it’s not built for.<\/p>\n

    The honest pitch is this: for a factory shredding its own mixed plastic scrap, one correctly specified shredder covers the overwhelming majority of cases. We’ve talked plenty of customers out of a second machine. What we won’t do is sell you an undersized unit that needs a second stage six months later \u2014 if your hardest material demands more machine, we’d rather tell you now.<\/p>\n

    Send us your material list, the biggest piece, and your monthly volume. That’s enough for us to tell you what one machine can do for you.<\/p>\n

    \u3088\u304f\u3042\u308b\u3054\u8cea\u554f<\/h2>\n

    Can one plastic shredder machine handle different types of plastic?<\/h3>\n

    Yes, in most cases. A shredder reduces material mechanically, so the same machine processes film, rigid parts, pipe, purge blocks and mixed rigid scrap \u2014 you adjust the screen, the rotor and cutter setup, and the ram force to suit the material. Buy the machine spec’d for your hardest feed and it will handle everything softer.<\/p>\n

    What plastics can a shredder process?<\/h3>\n

    Film and bags, thick-walled moldings and reject parts, pipes and profiles, purge lumps and solid blocks, woven and bulk bags, foam, and mixed rigid scrap. The limit is less about the polymer and more about density, form and contamination \u2014 very dense or metal-heavy items need a different machine class.<\/p>\n

    What’s the difference between a plastic shredder and a granulator?<\/h3>\n

    A shredder tears material at low speed and high torque, and tolerates large, awkward, dense feed. A granulator makes a precise scissor cut at high speed and needs smaller, more consistent feed. In practice, a shredder does the first reduction; if you need uniform fine regrind, a granulator follows it.<\/p>\n

    Do I need a separate shredder for film and for rigid plastic?<\/h3>\n

    Usually not. Film needs wrap-resistant rotor geometry and steady ram feed, while rigid scrap needs bite and torque, but one machine can be configured to run both \u2014 often with a screen change between jobs. Dedicated machines only make sense at high volume, where changeover costs more than a second machine.<\/p>\n

    When is one shredder not enough?<\/h3>\n

    When you need tight uniform regrind (add a granulator), when material is contaminated and needs washing (you need a washing line), when volumes exceed one machine’s throughput, or when the waste is very dense or metal-heavy (you need a heavy twin-shaft machine). Having several plastic types alone is not a reason to buy more machines.<\/p>\n

    How do I choose the right plastic shredder machine for mixed scrap?<\/h3>\n

    Spec it for your hardest, largest, densest material and let the screens handle the variation. Give your supplier the full material list, the biggest single piece, your required output, and your monthly volume. If they quote a machine without asking what you’re feeding, that’s a warning sign.<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

    This is the question behind half the emails I get from plant managers. “We run film offcuts, some thick-walled reject parts, a bit of pipe, and purge blocks from changeovers. Do we need a different shredder for each one?” The short answer is almost always no. One machine handles all of that \u2014 not by being a magic universal device, but because a well-specified plastic shredder machine is configurable. Same rotor housing, same drive, same frame. You change the screen, the rotor and cutter setup, and the feed arrangement to suit what’s going through it that week. Where people get burned is the opposite mistake: they buy a machine spec’d […]<\/p>","protected":false},"author":1,"featured_media":848,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"off","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-2183","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-shredding-machines-industrial-shredders"],"yoast_head":"\r\nPlastic Shredder Machine: One Machine for All Your Plastics? | SLECOTECH<\/title>\r\n<meta name=\"description\" content=\"Film, pipe, purge blocks and reject parts in one machine? Here's what a single plastic shredder machine can really process, how to configure it by material, and when one isn't enough.\" \/>\r\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\r\n<link rel=\"canonical\" href=\"https:\/\/slecotech.com\/ja\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/\" \/>\r\n<meta property=\"og:locale\" content=\"ja_JP\" \/>\r\n<meta property=\"og:type\" content=\"article\" \/>\r\n<meta property=\"og:title\" content=\"Plastic Shredder Machine: One Machine for All Your Plastics? | SLECOTECH\" \/>\r\n<meta property=\"og:description\" content=\"Film, pipe, purge blocks and reject parts in one machine? Here's what a single plastic shredder machine can really process, how to configure it by material, and when one isn't enough.\" \/>\r\n<meta property=\"og:url\" content=\"https:\/\/slecotech.com\/ja\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/\" \/>\r\n<meta property=\"og:site_name\" content=\"Industrial shredders & recycling equipment - Streamline Eco Tech\" \/>\r\n<meta property=\"article:published_time\" content=\"2026-09-24T14:00:00+00:00\" \/>\r\n<meta property=\"og:image\" content=\"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/05\/Single-shaft-shredder-blog-.png\" \/>\r\n\t<meta property=\"og:image:width\" content=\"200\" \/>\r\n\t<meta property=\"og:image:height\" content=\"200\" \/>\r\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\r\n<meta name=\"author\" content=\"yoyo\" \/>\r\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\r\n<meta name=\"twitter:creator\" content=\"@Slecotech\" \/>\r\n<meta name=\"twitter:site\" content=\"@Slecotech\" \/>\r\n<meta name=\"twitter:label1\" content=\"\u57f7\u7b46\u8005\" \/>\n\t<meta name=\"twitter:data1\" content=\"yoyo\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u63a8\u5b9a\u8aad\u307f\u53d6\u308a\u6642\u9593\" \/>\n\t<meta name=\"twitter:data2\" content=\"9\u5206\" \/>\r\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/\"},\"author\":{\"name\":\"yoyo\",\"@id\":\"https:\/\/slecotech.com\/#\/schema\/person\/c8e9a08c75b60ad356122c79f2386266\"},\"headline\":\"Plastic Shredder Machine: Can One Machine Really Handle All Your Plastics?\",\"datePublished\":\"2026-09-24T14:00:00+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/\"},\"wordCount\":1919,\"publisher\":{\"@id\":\"https:\/\/slecotech.com\/#organization\"},\"image\":{\"@id\":\"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/05\/Single-shaft-shredder-blog-.png\",\"articleSection\":[\"Shredders\"],\"inLanguage\":\"ja\"},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/\",\"url\":\"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/\",\"name\":\"Plastic Shredder Machine: One Machine for All Your Plastics? | SLECOTECH\",\"isPartOf\":{\"@id\":\"https:\/\/slecotech.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/05\/Single-shaft-shredder-blog-.png\",\"datePublished\":\"2026-09-24T14:00:00+00:00\",\"description\":\"Film, pipe, purge blocks and reject parts in one machine? Here's what a single plastic shredder machine can really process, how to configure it by material, and when one isn't enough.\",\"breadcrumb\":{\"@id\":\"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#breadcrumb\"},\"inLanguage\":\"ja\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"ja\",\"@id\":\"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#primaryimage\",\"url\":\"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/05\/Single-shaft-shredder-blog-.png\",\"contentUrl\":\"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/05\/Single-shaft-shredder-blog-.png\",\"width\":200,\"height\":200,\"caption\":\"Single-shaft-shredder\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u9996\u9875\",\"item\":\"https:\/\/slecotech.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Plastic Shredder Machine: Can One Machine Really Handle All Your Plastics?\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/slecotech.com\/#website\",\"url\":\"https:\/\/slecotech.com\/\",\"name\":\"Streamline Eco Tech\",\"description\":\"Industrial shredders & recycling equipment\",\"publisher\":{\"@id\":\"https:\/\/slecotech.com\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/slecotech.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"ja\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/slecotech.com\/#organization\",\"name\":\"Streamline Eco Tech\",\"url\":\"https:\/\/slecotech.com\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ja\",\"@id\":\"https:\/\/slecotech.com\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/01\/logo.png\",\"contentUrl\":\"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/01\/logo.png\",\"width\":512,\"height\":512,\"caption\":\"Streamline Eco Tech\"},\"image\":{\"@id\":\"https:\/\/slecotech.com\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/x.com\/Slecotech\",\"https:\/\/www.youtube.com\/@StreamlineEcoTech-Recycling\",\"https:\/\/www.instagram.com\/streamlineecotech\/\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/slecotech.com\/#\/schema\/person\/c8e9a08c75b60ad356122c79f2386266\",\"name\":\"yoyo\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"ja\",\"@id\":\"https:\/\/slecotech.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/e2a67cdaf0627d37bbb30c7f027b0b0312cc3c01cba381188db3f287c51c6e9e?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/e2a67cdaf0627d37bbb30c7f027b0b0312cc3c01cba381188db3f287c51c6e9e?s=96&d=mm&r=g\",\"caption\":\"yoyo\"},\"sameAs\":[\"http:\/\/49.51.38.20\"],\"url\":\"https:\/\/slecotech.com\/ja\/author\/howard\/\"}]}<\/script>\r\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Plastic Shredder Machine: One Machine for All Your Plastics? | SLECOTECH","description":"Film, pipe, purge blocks and reject parts in one machine? Here's what a single plastic shredder machine can really process, how to configure it by material, and when one isn't enough.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/slecotech.com\/ja\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/","og_locale":"ja_JP","og_type":"article","og_title":"Plastic Shredder Machine: One Machine for All Your Plastics? | SLECOTECH","og_description":"Film, pipe, purge blocks and reject parts in one machine? Here's what a single plastic shredder machine can really process, how to configure it by material, and when one isn't enough.","og_url":"https:\/\/slecotech.com\/ja\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/","og_site_name":"Industrial shredders & recycling equipment - Streamline Eco Tech","article_published_time":"2026-09-24T14:00:00+00:00","og_image":[{"width":200,"height":200,"url":"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/05\/Single-shaft-shredder-blog-.png","type":"image\/png"}],"author":"yoyo","twitter_card":"summary_large_image","twitter_creator":"@Slecotech","twitter_site":"@Slecotech","twitter_misc":{"\u57f7\u7b46\u8005":"yoyo","\u63a8\u5b9a\u8aad\u307f\u53d6\u308a\u6642\u9593":"9\u5206"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#article","isPartOf":{"@id":"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/"},"author":{"name":"yoyo","@id":"https:\/\/slecotech.com\/#\/schema\/person\/c8e9a08c75b60ad356122c79f2386266"},"headline":"Plastic Shredder Machine: Can One Machine Really Handle All Your Plastics?","datePublished":"2026-09-24T14:00:00+00:00","mainEntityOfPage":{"@id":"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/"},"wordCount":1919,"publisher":{"@id":"https:\/\/slecotech.com\/#organization"},"image":{"@id":"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#primaryimage"},"thumbnailUrl":"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/05\/Single-shaft-shredder-blog-.png","articleSection":["Shredders"],"inLanguage":"ja"},{"@type":"WebPage","@id":"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/","url":"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/","name":"Plastic Shredder Machine: One Machine for All Your Plastics? | SLECOTECH","isPartOf":{"@id":"https:\/\/slecotech.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#primaryimage"},"image":{"@id":"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#primaryimage"},"thumbnailUrl":"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/05\/Single-shaft-shredder-blog-.png","datePublished":"2026-09-24T14:00:00+00:00","description":"Film, pipe, purge blocks and reject parts in one machine? Here's what a single plastic shredder machine can really process, how to configure it by material, and when one isn't enough.","breadcrumb":{"@id":"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#breadcrumb"},"inLanguage":"ja","potentialAction":[{"@type":"ReadAction","target":["https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/"]}]},{"@type":"ImageObject","inLanguage":"ja","@id":"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#primaryimage","url":"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/05\/Single-shaft-shredder-blog-.png","contentUrl":"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/05\/Single-shaft-shredder-blog-.png","width":200,"height":200,"caption":"Single-shaft-shredder"},{"@type":"BreadcrumbList","@id":"https:\/\/slecotech.com\/plastic-shredder-machine-can-one-machine-really-handle-all-your-plastics\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"\u9996\u9875","item":"https:\/\/slecotech.com\/"},{"@type":"ListItem","position":2,"name":"Plastic Shredder Machine: Can One Machine Really Handle All Your Plastics?"}]},{"@type":"WebSite","@id":"https:\/\/slecotech.com\/#website","url":"https:\/\/slecotech.com\/","name":"Streamline Eco Tech","description":"Industrial shredders & recycling equipment","publisher":{"@id":"https:\/\/slecotech.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/slecotech.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"ja"},{"@type":"Organization","@id":"https:\/\/slecotech.com\/#organization","name":"Streamline Eco Tech","url":"https:\/\/slecotech.com\/","logo":{"@type":"ImageObject","inLanguage":"ja","@id":"https:\/\/slecotech.com\/#\/schema\/logo\/image\/","url":"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/01\/logo.png","contentUrl":"https:\/\/slecotech.com\/wp-content\/uploads\/2025\/01\/logo.png","width":512,"height":512,"caption":"Streamline Eco Tech"},"image":{"@id":"https:\/\/slecotech.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/x.com\/Slecotech","https:\/\/www.youtube.com\/@StreamlineEcoTech-Recycling","https:\/\/www.instagram.com\/streamlineecotech\/"]},{"@type":"Person","@id":"https:\/\/slecotech.com\/#\/schema\/person\/c8e9a08c75b60ad356122c79f2386266","name":"yoyo","image":{"@type":"ImageObject","inLanguage":"ja","@id":"https:\/\/slecotech.com\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/e2a67cdaf0627d37bbb30c7f027b0b0312cc3c01cba381188db3f287c51c6e9e?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/e2a67cdaf0627d37bbb30c7f027b0b0312cc3c01cba381188db3f287c51c6e9e?s=96&d=mm&r=g","caption":"yoyo"},"sameAs":["http:\/\/49.51.38.20"],"url":"https:\/\/slecotech.com\/ja\/author\/howard\/"}]}},"_links":{"self":[{"href":"https:\/\/slecotech.com\/ja\/wp-json\/wp\/v2\/posts\/2183","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/slecotech.com\/ja\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/slecotech.com\/ja\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/slecotech.com\/ja\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/slecotech.com\/ja\/wp-json\/wp\/v2\/comments?post=2183"}],"version-history":[{"count":1,"href":"https:\/\/slecotech.com\/ja\/wp-json\/wp\/v2\/posts\/2183\/revisions"}],"predecessor-version":[{"id":2184,"href":"https:\/\/slecotech.com\/ja\/wp-json\/wp\/v2\/posts\/2183\/revisions\/2184"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/slecotech.com\/ja\/wp-json\/wp\/v2\/media\/848"}],"wp:attachment":[{"href":"https:\/\/slecotech.com\/ja\/wp-json\/wp\/v2\/media?parent=2183"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/slecotech.com\/ja\/wp-json\/wp\/v2\/categories?post=2183"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/slecotech.com\/ja\/wp-json\/wp\/v2\/tags?post=2183"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}