Home / Products / Pipe Shredder – P Series
Pipe Shredder – P Series
Optimized shredding for long pipes and rigid profiles.
Made for long feedstock
Output control
Line integration
Typical reply within 24–48 hours. Share material, throughput target, output size and destination country.
Engineered to stay stable under load
Not a “spec sheet machine”. We focus on real feedstock variability, stable throughput and maintainability.
Stable cutting for pipes
Anti‑wrapping options
Configurable discharge
Serviceable design
Built for real feedstock variety
Pick common materials below — we can tune knives, screens and options to match.
HDPE pipes
PP pipes
PVC pipes
Profiles
Large diameter
Post‑industrial waste
Pick a model, copy the table
Below is a clean specs table. If you need a datasheet PDF, request a quote and we’ll send it.
| Model | P800 | P1000 | P1200 |
| Rotor Diameter (mm) | φ800 | φ1000 | φ1200 |
| Rotor width (mm) | 820 | 1030 | 1230 |
| Spindle speed(rpm) | 36 | 33 | 27 |
| Counter knife qty (pcs) | 2 | 3 | 4 |
| Rotor knife qty (pcs) | 102 | 126 | 150 |
| Motor Power (kW) | 30＋30 | 37＋37 | 45＋45 |
| Hydraulic drive capacity (kW) | 11 | 15 | 15 |
| L×W×HDimension(mm) | 9580×2300×2300 | 11000×2500×2500 | 11580×2900×2850 |
| Weight (kg) | 7500 | 9000 | 11000 |
Configure around your site constraints
We configure the machine around your material, layout, power and compliance constraints.
Feeding
- Long‑pipe feeding design
- Infeed conveyor options
Discharge
- Conveyor discharge
- Screw discharge (optional)
Controls
- PLC / HMI
- Auto‑reverse logic (optional)
Safety
- Guarding and interlocks
- Emergency stops
Reduce project risk
We support selection, delivery and long‑term operation.
Lead time
Installation
Training
Spare parts
A real project pattern
Material
Target
Configuration
Result
Common questions
How do I choose the right model?
Can output size be controlled?
What affects throughput the most?
Do you support overseas delivery?
What information do you need for a quote?
Request a quote in 2 minutes
Send material details, throughput target and output size — we’ll respond with a configuration recommendation.
About the Pipe Shredder (P Series)
The SLECOTECH Pipe Shredder (P Series) is purpose-built for long, rigid plastic pipes and profiles – PVC, PE and PP – that ordinary shredders cannot grip. A hydraulic pusher feeds the pipe horizontally into the single shaft rotor and a V-channel cradles it for stable cutting.
Key Applications
- PVC / PE water and drainage pipes
- Plastic profiles and extrusion scrap
- Pipe offcuts from extrusion lines
- Cable ducts and conduit
- Large-diameter hollow plastic sections
Technical Advantages
- Horizontal V-channel infeed cradles long pipes securely
- Hydraulic pusher maintains steady feed without manual handling
- Handles very long lengths in a compact footprint
- Rotor and screen sized for pipe wall thickness
- Integrated with extrusion lines for in-line scrap recovery
Frequently Asked Questions
Why use a dedicated pipe shredder instead of a standard shredder?
Long pipes roll and bridge in a standard hopper. The P Series’ horizontal V-channel and hydraulic pusher hold and feed pipe safely, something a vertical-feed machine cannot do reliably.
What pipe diameters can it handle?
The P Series is configured for the diameters in your extrusion range; the cradle and rotor width are matched to the longest, widest pipe you run. Contact us with your size range for the right configuration.
Can it also process pipe offcuts and profiles?
Yes – offcuts, fitting scrap and solid profiles are ideal feeds and recover directly back into the process as regrind.
How is output size controlled?
As with other single-shaft machines, a discharge screen sets the flake size; swap screens to match your regrind specification.