Home / Products / Pipe Shredder – P Series
Product
Τεμαχιστής σωλήνων – P Series
Optimized shredding for long pipes and rigid profiles.
Made for long feedstock
Feeding and cutting design tuned for pipes/profiles.
Output control
Knife + screen setup to reduce long strips.
Line integration
Works with conveyors and downstream granulation.
Typical reply within 24–48 hours. Share material, throughput target, output size and destination country.
Engineered to stay stable under load
Not a “spec sheet machine”. We focus on real feedstock variability, stable throughput and maintainability.
Stable cutting for pipes
Designed to avoid bouncing and unstable feeding.
Anti‑wrapping options
Helps reduce wrapping risk on certain materials.
Configurable discharge
Conveyor/screw discharge based on layout.
Serviceable design
Easy access for maintenance and wear parts.
Built for real feedstock variety
Pick common materials below — we can tune knives, screens and options to match.
HDPE pipes
Common pipe recycling feedstock.
PP pipes
Rigid PP pipes and thick profiles.
PVC pipes
Configured knives for PVC processing.
Profiles
Long rigid profiles and trims.
Large diameter
Feeding solutions for large diameter pipes.
Post‑industrial waste
Factory scrap pipes and offcuts.
Pick a model, copy the table
Below is a clean specs table. If you need a datasheet PDF, request a quote and we’ll send it.
| Μοντέλο | P800 | P1000 | P1200 |
| Διάμετρος ρότορα (mm) | φ800 | φ1000 | φ1200 |
| Πλάτος ρότορα (mm) | 820 | 1030 | 1230 |
| Ταχύτητα ατράκτου (rpm) | 36 | 33 | 27 |
| Ποσότητα μαχαιριού μετρητή (τεμ.) | 2 | 3 | 4 |
| Αριθμός μαχαιριού ρότορα (τεμ.) | 102 | 126 | 150 |
| Ισχύς κινητήρα (kW) | 30＋30 | 37＋37 | 45＋45 |
| Ικανότητα υδραυλικής κίνησης (kW) | 11 | 15 | 15 |
| L × W × HDimension (mm) | 9580×2300×2300 | 11000×2500×2500 | 11580×2900×2850 |
| Βάρος (kg) | 7500 | 9000 | 11000 |
Configure around your site constraints
We configure the machine around your material, layout, power and compliance constraints.
Feeding
- Long‑pipe feeding design
- Infeed conveyor options
Discharge
- Conveyor discharge
- Screw discharge (optional)
Controls
- PLC / HMI
- Auto‑reverse logic (optional)
Safety
- Guarding and interlocks
- Emergency stops
Reduce project risk
We support selection, delivery and long‑term operation.
Lead time
We confirm lead time after your configuration and destination country.
Installation
Installation guidance, commissioning and operator training support.
Training
Remote + on‑site training options for operators and maintenance team.
Spare parts
Knife sets, screens (if applicable) and critical spares supply.
A real project pattern
Material
Mixed plastics (rigid + film)
Target
Stable size reduction for washing line feeding
Configuration
Pipe Shredder – P Series + conveyor + screen selection
Result
More stable downstream throughput and easier operation
Common questions
How do I choose the right model?
Share your feedstock, throughput target, output size and site constraints. We will recommend a feasible model range and configuration.
Can output size be controlled?
Yes. Depending on the machine type, output is controlled by screen size and knife configuration, or by cutter profile and downstream secondary crushing.
What affects throughput the most?
Material type, feeding method, required output size, knife design and operating hours. Provide details and we will estimate a realistic range.
Do you support overseas delivery?
Yes. We ship globally and support overseas projects with remote and on‑site service depending on schedule and location.
What information do you need for a quote?
Material, throughput, output size, contamination/moisture, power/space constraints and destination country.
Request a quote in 2 minutes
Send material details, throughput target and output size — we’ll respond with a configuration recommendation.