por yoyo | Set 15, 2026 | Trituradores
This is the question behind half the emails I get from plant managers. “We run film offcuts, some thick-walled reject parts, a bit of pipe, and purge blocks from changeovers. Do we need a different shredder for each one?” The short answer is almost always... por yoyo | Set 15, 2026 | Trituradores
Walk into almost any injection molding shop and there’s a corner where the purge lumps live. Startup purges from changeovers, color-change blocks, off-spec parts, the occasional solid lump the size of a shoe box. Somebody wheels a bin out there every week and it... por yoyo | Set 14, 2026 | Trituradores
Somebody walks past the shredder, hears a change in pitch, and pulls the logbook. Last blade change: eleven weeks ago. On paper, that’s fine. The manual says rotate the blades every 300 hours, and they’re at 280. Then they open the chamber and find half... por yoyo | Set 8, 2026 | Trituradores
There are three kinds of shredder buyers I meet. The first watched a video of a single shaft shredder eating a plastic pallet whole and decided that’s what they need. Doesn’t matter what they’re shredding. They want that machine. The second already... por yoyo | 3 de setembro de 2026 | Trituradores
Every crusher comes with a capacity number. “2,000 kg/h.” “5 tons per hour.” Looks great on the brochure. Then you put it in your line, feed it real material, and it does maybe 60% of that number. Sometimes less. Nobody warned you that the... por yoyo | Ago 31, 2026 | Trituradores
The screen under a plastic crusher is one of the cheapest parts on the machine. A replacement costs a few hundred dollars, maybe less. It’s also the part that decides how fast the crusher runs, how big the flakes come out, how much power you burn, and whether...