Home / Products / Double Rotor Shredder – T Series
Product
Τεμαχιστής διπλού ρότορα – T Series
Stable throughput for challenging feedstock — built to reduce wear.
Stable continuous throughput
Optimized rotor design for consistent processing.
Wear‑reduction design
Even cutter distribution to reduce wear and dust.
Line‑ready integration
Matches washing / separation / RDF downstream processes.
Typical reply within 24–48 hours. Share material, throughput target, output size and destination country.
Engineered to stay stable under load
Not a “spec sheet machine”. We focus on real feedstock variability, stable throughput and maintainability.
Strong tearing action
Designed for challenging materials and mixed feedstock.
Even cutter distribution
Better wear balance and longer service life.
Dust control ready
Interfaces for dust extraction and site compliance.
Configurable discharge
Supports different discharge/feeding layouts.
Built for real feedstock variety
Pick common materials below — we can tune knives, screens and options to match.
Industrial waste
Stable size reduction for mixed industrial waste.
Plastics
Rigid plastics and thick parts in recycling lines.
Used cables
Pre‑processing before separation.
Wood pallets
Bulky wood waste size reduction.
RDF prep
Consistent pre‑processing for RDF applications.
Confidential documents
Secure, stable shredding for compliance.
Pick a model, copy the table
Below is a clean specs table. If you need a datasheet PDF, request a quote and we’ll send it.
| Μοντέλο | T800 | T1000 | T1200 | T1600 |
| Διάμετρος ρότορα (mm) | φ420 | φ420 | φ420 | φ420 |
| Πλάτος ρότορα (mm) | 800 | 1000 | 1200 | 1600 |
| Ταχύτητα ατράκτου (rpm) | 38 | 38 | 38 | 38 |
| Ποσότητα μαχαιριού μετρητή (τεμ.) | 4 | 6 | 8 | 8 |
| Αριθμός μαχαιριού ρότορα (τεμ.) | 72 | 96 | 112 | 144 |
| Ισχύς κινητήρα (kW) | 37×2 | 55×2 | 75×2 | 90×2 |
| Ικανότητα υδραυλικής κίνησης (kW) | 1.5 | 1.5 | 1.5 | 1.5 |
| Άνοιγμα οθόνης (mm) | >30 | >30 | >30 | >30 |
| L × W × HDimension (mm) | 3000×1750×2700 | 3200×1750×2700 | 3500×1750×2700 | 5000×1900×2700 |
| Βάρος (kg) | 5000 | 7000 | 9500 | 15000 |
Configure around your site constraints
We configure the machine around your material, layout, power and compliance constraints.
Feeding
- Conveyor / hopper options
- Anti‑bridging design (optional)
Discharge
- Conveyor discharge
- Air conveying interface (optional)
Controls
- PLC / HMI
- Automation integration
Dust/noise
- Dust extraction ports
- Noise reduction enclosure options
Reduce project risk
We support selection, delivery and long‑term operation.
Lead time
We confirm lead time after your configuration and destination country.
Installation
Installation guidance, commissioning and operator training support.
Training
Remote + on‑site training options for operators and maintenance team.
Spare parts
Knife sets, screens (if applicable) and critical spares supply.
A real project pattern
Material
Mixed plastics (rigid + film)
Target
Stable size reduction for washing line feeding
Configuration
Double Rotor Shredder – T Series + conveyor + screen selection
Result
More stable downstream throughput and easier operation
Common questions
How do I choose the right model?
Share your feedstock, throughput target, output size and site constraints. We will recommend a feasible model range and configuration.
Can output size be controlled?
Yes. Depending on the machine type, output is controlled by screen size and knife configuration, or by cutter profile and downstream secondary crushing.
What affects throughput the most?
Material type, feeding method, required output size, knife design and operating hours. Provide details and we will estimate a realistic range.
Do you support overseas delivery?
Yes. We ship globally and support overseas projects with remote and on‑site service depending on schedule and location.
What information do you need for a quote?
Material, throughput, output size, contamination/moisture, power/space constraints and destination country.
Request a quote in 2 minutes
Send material details, throughput target and output size — we’ll respond with a configuration recommendation.