Home / Products / Plastic Crusher – C Series

Product

Plastic Crusher – C Series

Uniform granulation for washing, reprocessing and pelletizing lines.

Uniform granules

Screen‑controlled granule size for consistent downstream.

Efficient cutting

High‑speed rotor for stable output and productivity.

Maintenance friendly

Easy blade adjustment and servicing.
Request a quote

Typical reply within 24–48 hours. Share material, throughput target, output size and destination country.

Plastic granulator machine
Crusher
Crusher

Engineered to stay stable under load

Not a “spec sheet machine”. We focus on real feedstock variability, stable throughput and maintainability.

Screen‑controlled output

Choose screen size based on pelletizing/washing needs.

Robust rotor

Designed for continuous workshop operation.

Noise/dust ready

Optional enclosure and dust extraction interfaces.

Line integration

Works with conveyors, hoppers and bagging systems.

Built for real feedstock variety

Pick common materials below — we can tune knives, screens and options to match.

Rigid plastics

PP/PE/ABS rigid parts and containers.

Sprues

Injection molding sprues and runners.

Pipes & profiles

Secondary crushing for reprocessing.

Regrind

Sizing for washing and pelletizing.

Mixed plastics

Configured knives/screens for mixed feedstock.

Workshop recycling

On‑site recycling and size reduction.

Pick a model, copy the table

Below is a clean specs table. If you need a datasheet PDF, request a quote and we’ll send it.

 ModelC600/450C800/600C1000/600C1200/600  C1400/600 C1200/800
Rotor Diameter (mm)φ450φ600φ600φ600φ600φ800
 Rotor width (mm)6008001000120014001200
Spindle speed(rpm)580520520520520420
 Counter knife qty (pcs)222/32/32/32/3
Rotor knife qty (pcs)33/55/75/75/75/7/9
 Motor Power (kW)3037/5555/7575/90110/132110/132
Hydraulic drive capacity (kW)1.51.51.51.533
Lnlen size600×580800×9301000×9301200×10001400×10001200×1100
Screen opening(mm)>6>6>6>6>10>10
L×W×HDimension(mm)1800×1250×22002200×1660×34202300×1860×34202300×2180×35202300×2400×35202300×2200×3720
Weight (kg)200037004300520065008000

Configure around your site constraints

We configure the machine around your material, layout, power and compliance constraints.

Screen sizes

  • Granule size selection
  • Quick‑change screens (optional)

Feeding

  • Hopper / conveyor feeding
  • Sound enclosure feeding interfaces

Discharge

  • Bagging interface
  • Conveyor discharge

Controls

  • Motor protection
  • Load monitoring (optional)

Blades

  • Blade material options
  • Spare blade sets

Reduce project risk

We support selection, delivery and long‑term operation.

Lead time

We confirm lead time after your configuration and destination country.

Installation

Installation guidance, commissioning and operator training support.

Training

Remote + on‑site training options for operators and maintenance team.

Spare parts

Knife sets, screens (if applicable) and critical spares supply.

A real project pattern

Material

Mixed plastics (rigid + film)

Target

Stable size reduction for washing line feeding

Configuration

Plastic Crusher – C Series + conveyor + screen selection

Result

More stable downstream throughput and easier operation

Common questions

How do I choose the right model?
Share your feedstock, throughput target, output size and site constraints. We will recommend a feasible model range and configuration.
Can output size be controlled?
Yes. Depending on the machine type, output is controlled by screen size and knife configuration, or by cutter profile and downstream secondary crushing.
What affects throughput the most?
Material type, feeding method, required output size, knife design and operating hours. Provide details and we will estimate a realistic range.
Do you support overseas delivery?
Yes. We ship globally and support overseas projects with remote and on‑site service depending on schedule and location.
What information do you need for a quote?
Material, throughput, output size, contamination/moisture, power/space constraints and destination country.

Request a quote in 2 minutes

Send material details, throughput target and output size — we’ll respond with a configuration recommendation.

Request a quote

About the Plastic Crusher / Granulator (C Series)

The SLECOTECH Plastic Crusher (C Series) is a high-speed granulator that reduces rigid plastics and film into uniform flakes or regrind. It sits downstream of shredders to hit the fine particle size needed for washing, extrusion or direct reuse.

Key Applications

  • Rigid plastic lumps and purgings
  • Blow-moulded and injection scraps
  • Plastic film and bags (with proper rotors)
  • PET and HDPE bottles
  • Sprues, runners and in-house production scrap

Technical Advantages

  • High-speed rotor with scissors-cut action for low dust and uniform flakes
  • Water-cooled bearing housings for continuous running
  • Fully sound-damped enclosure for a quieter shop floor
  • Adjustable gap and screen for precise flake size
  • Easy-open chamber for fast cleaning and colour changes

Frequently Asked Questions

What is the difference between a crusher and a shredder?

A shredder coarsely pre-cuts bulky material at low speed; a crusher (granulator) finely grinds it at high speed into uniform flakes. They are usually paired: shred first, then crush.

Can the C Series handle both rigid plastic and film?

Yes, with the right rotor and knife configuration. Rigid plastic and film need different blade geometries, so tell us your dominant material when ordering.

What flake size does it produce?

Flake size depends on the screen; typical regrind is a few millimetres. We size the screen to your washing or extrusion requirement.

How do I keep flakes clean between colours?

The chamber opens fully for quick cleaning, and a colour-change routine (vacuum or manual wipe-down) prevents cross-contamination between runs.

Related Equipment